This Setting Tool uses the same adapters for running as are used with a Baker E-4 Wireline Setting Tool.
The B Setting Tool is run into the desired setting depth. Sufficient pressure is applied to set and pack off the packer, bridge plug, or cement retainer. The pressure, or combination of pressure and tubing tension, then shears the Shear Stud or Ring, freeing the Setting Assembly from the packer, bridge plug, or cement retainer. The Setting Tool will automatically drain the Tubing String as it is being pulled.
Features:
- Simple operation
- Compact, Short, easy to transport and run
- Pressure chambers can be added to lower setting pressure
- Parts are interchangeable with other manufacturers
A Fill Sub can be used in conjunction with the B series setting tool. This tool allows the tubing to be ran in an open condition, allowing it to be filled during the run in procedure. This tool is threaded directly onto the top of the B series setting tool, and is available in 60.3mm / 2-3/8” EUE Box x Pin connections;
- Once setting depth has been achieved, pressure activates the ball against the seat, shifting sleeve to the closed position, the pressure is then allowed to flow through the Fill Sub and apply against the B series setting tool.
Additional Information
To view additional technical information or specification, please login. If you don’t have an account, please contact us.
Login
